Shure Noise Reduction Machine A7WS User Manual

A7WS Windscreen

Instruction Sheet

1. To avoid tearing the windscreen during removal, grip it from the plastic

ring and the base and remove by gently pulling and twisting.

2. If desired, adhere the supplied velcro strips around the microphone grille,

approximately one inch from the base of the grille (as shown above) to

hold new windscreen in place.

3. Install new windscreen by stretching over the velcro strips, then

squeezing at the base of the windscreen to adhere to the velcro. No

velcro strip inside the windscreen is needed, as the windscreen itself will

adhere to the velcro. To remove, grip at the base of the windscreen and

pull while twisting.

United States, Canada, Latin America, Caribbean:

5800 W. Touhy Avenue, Niles, IL 60714-4608, U.S.A.

Phone: 847-600-2000 U.S. Fax: 847-600-1212 Intl Fax: 847-600-6446

Europe, Middle East, Africa:

Shure Europe GmbH, Phone: 49-7131-72140 Fax: 49-7131-721414

Asia, Pacific:

Shure Asia Limited, Phone: 852-2893-4290 Fax: 852-2893-4055

Printed in U.S.A.

27B3111 (2)