Notes on radio reception
3-292-590-11(2)
Important Safety
Instructions
WARNING
Keep away digital music player or mobile phone
What is iTunes Tagging? Specifications
Connecting the
antenna
from the AM loop antenna or the FM antenna,
as this may lead to interference of reception.
To reduce the risk of fire or electric shock, do
not expose this apparatus to rain or
moisture.
The iTunes Tag button on the new XDR-S10HDiP
Time display
1) Read these instructions.
allows you to tag songs you like that are broadcast by
HD Radio stations. Information about these tagged
songs is stored by the receiver and transferred to
your iPod. When you connect your iPod to your
computer, iTunes automatically presents the songs in
a new Tagged playlist so you can preview, buy, and
download them. iTunes Tagging is a great way to
discover new music add it to your collection!
12-hour system
Frequency range
2) Keep these instructions.
When you are listening to the radio with an
iPhone connected to the unit, interference with
radio reception may occur.
When you are listening to the radio while
charging an iPod, interference with radio
reception may occur.
3) Heed all warnings.
To reduce the risk of fire, do not cover the
ventilation opening of the apparatus with
newspapers, tablecloths, curtains, etc. Do not
place the naked flame sources such as lighted
candles on the apparatus.
To reduce the risk of fire or electric shock, do not
expose this apparatus to dripping or splashing,
and do not place objects filled with liquids, such
as vases, on the apparatus.
To connect the AM loop
antenna
4) Follow all instructions.
Band
FM
AM
Frequency
87.5 – 108 MHz 0.1 MHz
530 – 1 710 kHz 10 kHz
Channel step
FM/AM
5) Do not use this apparatus near water.
6) Clean only with dry cloth.
The shape and the length of the antenna is
designed to receive AM signals. Do not dismantle
or roll up the antenna.
7) Do not block any ventilation openings.
Install in accordance with the manufacturer’s
instructions.
Digital Radio
Speaker
Approx. 6.6 cm (2 5/8 inches) dia. 8 Ω
1 Remove only the loop part from the
plastic stand.
2 Set up the AM loop antenna.
8) Do not install near any heat sources such as
radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce
heat.
9) Do not defeat the safety purpose of the
polarized or grounding-type plug. A polarized
plug has two blades with one wider than the
other. A grounding type plug has two blades
and a third grounding prong. The wide blade
or the third prong are provided for your safety.
If the provided plug does not fit into your
outlet, consult an electrician for replacement
of the obsolete outlet.
10)Protect the power cord from being walked on
or pinched particularly at plugs, convenience
receptacles, and the point where they exit
from the apparatus.
11)Only use attachments/accessories specified by
the manufacturer.
Input
Using the connector
cover
AUDIO IN jack (ø 3.5 mm stereo minijack)
Antenna terminal
75 Ω antenna terminal for FM
Antenna terminal for AM
Audio power specifications
POWER OUTPUT AND TOTAL HARMONIC
DISTORTION
With 8-ohm loads, both channels driven from
150-10,000 kHz; rated 3W per channel-minimum
RMS, with no more than 10% total harmonic
distortion.
Power output
4 W + 4 W (maximum power)
Features
Do not install the appliance in a confined space,
such as a bookcase or built-in cabinet.
Operating Instructions
FM/AM Digital Radio with HD Radio
To protect the connector of the unit from dust or
dirt, you can put the connector cover on.
technology and iPod / iPhone compatibility
Do not expose the batteries (battery pack or
batteries installed) to excessive heat such as
sunshine, fire or the like for a long time.
iTunes Tagging capability, enabling the user to
save song information with the touch of a
button while listening to an HD Radio station.
Large LCD displays HD Radio information
Stereo speakers with surround sound function
Fully adjustable tone control for fine tuning of
bass and treble
XDR-S10HDiP
Attaching the connector cover
Match both claws of the connector cover with the
pits inside of the connector and press the other
side down until it clicks.
As the main plug is used to disconnect the unit
from the mains, connect the unit to an easily
accessible AC outlet. Should you notice an
abnormality in the unit, disconnect the main plug
from the AC outlet immediately.
3 Connect the cords to the AM antenna
terminals.
Cord (A) or cord (B) can be connected to
either terminal.
©2008 Sony Corporation
Printed in China
Supplied remote commander
You are cautioned that any changes or
modifications not expressly approved in this
manual could void your authority to operate this
equipment.
Power requirements
Size AAA (R03) 2
120 V AC, 60 Hz
Dimensions
Approx. 330 130 135 mm (w/h/d)
(13 5 1/8 5 3/8 inches) not incl. projecting
parts and controls
Precautions
Play the unit on the power source specified in
“Specifications”.
iPod and VOLUME + buttons
have a tactile dot.
These following indications are located on the
bottom exterior of the power supply unit.
Insert the cord
while pushing
down the
12)Use only with the cart, stand, tripod, bracket,
or table specified by the manufacturer, or sold
with the apparatus. When a cart is used, use
caution when moving the cart/apparatus
combination to avoid injury from tip-over.
To disconnect the AC power cord (mains lead),
pull it out by the plug, not the cord.
Owner’s Record
e model number and the serial number are located on the bottom.
Mass
terminal clamp.
Removing the connector cover
Pull up the tab of the connector cover using your
finger.
Record the serial number in the space provided below. Refer to them whenever you call upon your Sony dealer regarding this product.
The unit is not disconnected from the mains as
long as it is connected to the AC outlet, even if
the unit itself has been turned off.
Approx. 3.1 kg (6 lb 13.3 oz) incl. power supply
unit
Supplied accessories
Remote commander (1)
FM wire antenna (1)
FM dipole antenna (1)
AM loop antenna (1)
Audio connecting cable (1)
Universal dock adapter for iPhone (1)
Connector cover (1)
Model No. XDR-S10HDiP
4 Make sure the AM loop antenna is
Serial No.________________________________
The dating code and the nameplate are located
on the bottom exterior of the unit.
This symbol is intended to alert the
user to the presence of uninsulated
“dangerous voltage” within the
product’s enclosure that may be of
sufficient magnitude to constitute a risk
of electric shock to persons.
connected firmly by pulling softly.
Preparing the remote
commander
Since a strong magnet is used for the speaker,
keep personal credit cards using magnetic coding
or spring-wound watches away from the unit to
prevent possible damage from the magnet.
Do not leave the unit in a location near a heat
source such as a radiator or airduct, or in a
place subject to direct sunlight, excessive dust,
mechanical vibration, or shock.
Allow adequate air circulation to prevent
internal heat build-up. Do not place the unit on
a surface (a rug, a blanket, etc.) or near
materials (a curtain) which might block the
ventilation holes.
13)Unplug this apparatus during lightning storms
or when unused for long periods of time.
14)Refer all servicing to qualified service
personnel. Servicing is required when the
apparatus has been damaged in any way, such
as power-supply cord or plug is damaged,
liquid has been spilled or objects have fallen
into the apparatus, the apparatus has been
exposed to rain or moisture, does not operate
normally, or has been dropped.
Adjusting the AM loop antenna
Find a place and an orientation that provide good
reception.
For customers who purchased this product in the USA
Proper registration will enable us to send you periodic mailings about new products, services, and other
important announcements. Registering your product will also allow us to contact you in the unlikely event that
the product needs adjustment or modification. ank you.
Installing the batteries into the remote
commander (See Fig. )
Insert two size AAA (R03) batteries (not
supplied).
Do not place the AM loop antenna near the
unit or other AV equipment, as noise may
result.
This symbol is intended to alert the user
to the presence of important operating
and maintenance (servicing) instructions
in the literature accompanying the
appliance.
Design and specifications are subject to change
without notice.
When to replace the batteries
With normal use, the batteries should last for
about six months. When the remote commander
no longer operates the unit, replace all the
batteries with new ones.
Tip
Compatible iPod models
Adjust the direction of the AM loop antenna for
best AM broadcast sound.
The compatible iPod models are as follows.
Update your iPod to use the latest software before
you use it.
INFORMATION
To connect the FM antenna
HD Radio Technology Manufactured Under
This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection
against harmful interference in a residential
installation. This equipment generates, uses and
can radiate radio frequency energy and, if not
installed and used in accordance with the
™
License From iBiquity Digital Corp. U.S. and
This unit comes supplied with an FM wire
antenna and FM dipole antenna. Connect
whichever antenna that provides the best
reception to the FM antenna terminal.
Should any solid object or liquid fall into the unit,
unplug the unit and have it checked by a qualified
personnel before operating it any further.
To clean the casing, use a soft cloth dampened
with a mild detergent solution.
Never touch the wire of the external FM
antenna during a thunderstorm. Furthermore,
immediately disconnect the AC power cord
from the radio.
Notes
Foreign Patents. HD Radio and the HD Radio
™
• Do not charge dry batteries.
• When you are not going to use the remote
commander for a long time, remove the
batteries to avoid any damage caused by leakage
and corrosion.
logo are proprietary trademarks of iBiquity
Digital Corp.
FM wire antenna
(supplied)
iPod nano 3rd
generation (video)
What is HD Radio™
Technology?
instructions, may cause harmful interference to
radio communications. However, there is no
guarantee that interference will not occur in a
particular installation. If this equipment does
cause harmful interference to radio or television
reception, which can be determined by turning
the equipment off and on, the user is encouraged
to try to correct the interference by one or more
of the following measures:
— Reorient or relocate the receiving
antenna.
— Increase the separation between the equipment
and receiver.
iPod classic
iPod touch
Using the remote
commander
HD Radio Broadcasting was approved by the
Federal Communications Commission in
October 2002 as the system for digital AM and
FM broadcasting in the U.S.
If you have any questions or problems concerning
your unit, please consult your nearest Sony dealer.
Common buttons that appear on both the remote
commander and the unit control the same
functions.
iPod nano 2nd
HD Radio technology features include:
– Static-free, clear radio reception.
– FM Multicasting – the ability to broadcast
multiple program streams over a single FM
frequency.
– A variety of “data services,” including text-based
information – artist name, song title, etc.
scrolled across your receiver display.
– Digital broadcasts in the same frequencies as
analog broadcasts; listeners do not need to learn
a new station number and today’s stations
remain at their current place on the dial.
Troubleshooting
generation
iPod 5th
generation (video)
(aluminium)
iPhone
Should any problem persist after you have made
the following checks, consult your nearest Sony
dealer.
ALARM button
Press to set the alarm to “ON” or “OFF.”
Press and hold for 2 seconds to enter “ALARM
TIME SET.”
FM dipole antenna
(supplied)
— Connect the equipment into an outlet on a circuit
different from that to which the receiver is
connected.
— Consult the dealer or an experienced radio/TV
technician for help.
A broadcast is received in analog only, even
though the area is within HD Radio
reception.
• Depending on the conditions, if the incoming
signal strength is too weak or unstable, the HD
indicator will not flash or light up. In that case,
the HD Radio broadcast will be received as an
analog signal.
TONE button
To set the tone directly.
iPod nano 1st
generation
iPod 4th generation
(color display)
iPod 4th
generation
HD SCAN button
The selected band is scanned, and receivable HD
Radio stations are played for 3 seconds in order of
frequency.
HD Radio technology is developed and licensed
by iBiquity Digital Corporation and supported by
the leaders of the broadcasting, consumer
electronics and automotive industries.
SCAN button
The radio or iPod alarm is activated but no
sound comes on at the preset alarm time.
• Has VOLUME been adjusted?
The selected band is scanned, and receivable
radio stations are played for 3 seconds in order of
frequency.
iPod mini
Adjusting the FM wire antenna
Be sure to fully extend the FM wire antenna, and
keep it as horizontal and vertical as possible.
There is no sound from the iPod.
• Make sure the iPod is securely connected.
• Adjust the VOLUME.
The iPod models that are compatible with iTunes
Tagging are as follows:
BRIGHT button
To adjust the brightness of the display.
iPod nano 3rd generation
iPod classic
The iPod cannot be operated with this unit.
• Make sure the iPod is securely connected.
iPod 5th generation
Adjusting the FM dipole antenna
* The models above may vary without notice. For
the latest information, check the website of
Apple Inc.
Be sure to fully extend the FM dipole antenna.
Align the antenna in the shape of a T and place in
a high position on a wall away from this unit.
The iPod cannot be charged.
• Make sure the iPod is securely connected.
“CANNOT DETECT” appears in the display
when connecting an iPod.
Notes
Tip
In these Operating Instructions, “iPod” is used
as a general reference for the iPod functions on
the iPod and iPhone, unless otherwise specified
by the text or illustrations.
• Disconnect the iPod once and then reconnect it
If you have poor FM reception, use a 75 Ω coaxial
cable (not supplied) to connect the unit to an
outdoor FM antenna as shown below.
securely.
iTunes Tagging requires iTunes 7.4 or later.
Outdoor FM antenna
|